2026 Cost Data · Wyoming

Wyoming Water Well Drilling Cost

The average residential well in Wyoming is 220 feet deep and costs $9,240 in 2026. Drilling rates range from $28 to $62 per foot, with total project costs varying based on depth, geology, and pump system.

Avg. Well Depth

220 ft

Cost / Foot

$28–$62

Total Project

$9,240

vs. National

23% above avg.

Wyoming Well Drilling Cost by Depth

Well Depth Drilling Only Complete System Est. Total
100 ft $2,800–$6,200 $7,600–$11,000 $9,000
150 ft $4,200–$9,300 $9,400–$14,500 $11,500
200 ft $5,600–$12,400 $11,200–$18,000 $14,000
300 ft $8,400–$18,600 $14,800–$25,000 $19,000
400 ft $11,200–$24,800 $18,400–$32,000 $24,000
500 ft $14,000–$31,000 $22,000–$39,000 $29,000

*Drilling only = drilling labor per foot. Complete system includes casing, pump, pressure tank, electrical, and permits. Costs are Wyoming estimates for 2026.

Wyoming Well System Component Costs

Service Low High Average
Well Casing — PVC (220 ft) $1,320 $2,420 $1,760
Well Casing — Steel (220 ft) $6,600 $28,600 $14,300
Submersible Pump $300 $2,000 $1,000
Pressure Tank $500 $2,000 $1,100
Electrical Hookup $1,000 $3,000 $1,800
Permits $50 $200 Varies
Water Quality Testing $50 $500 $200

*Component costs based on Wyoming average well depth of 220 ft. Steel casing is typically required for bedrock wells; PVC is used in unconsolidated formations.

Estimate Your Well Drilling Cost in Wyoming

Well Drilling Cost Calculator

Adjust the inputs to estimate your project cost

Well Type
Estimated Well Depth
220ft
50 ft800 ft
Ground Conditions
Casing Type
Include Pump & Pressure Tank?

Itemized Cost Estimate

Drilling: 220 ft × $25–$65/ft$5,500$14,300
Casing (PVC): 220 ft × $6–$11/ft$1,320$2,420
Submersible pump$775$1,640
Pressure tank$500$2,000
Electrical hookup$1,000$3,000
Permits (est.)$50$500
Water testing$50$500
Total Estimate$9,195$24,360

This estimate is 82% above the Wyoming average of $9,240

Get Exact Quotes from Local Pros →

Estimates are approximate. Actual costs depend on site conditions and contractor pricing.

Get Free Well Drilling Quotes in Wyoming

Compare prices from licensed WY well drillers near you.

Wyoming Geology & Aquifers

Wyoming's geology ranges from the granitic core of the Wind River and Bighorn ranges to thick Tertiary basin-fill sediments in the large structural basins (Powder River, Wind River, Green River). The Ogallala Formation underlies the southeast, and volcanic terrain characterizes the Yellowstone region with geothermal influences on groundwater.

Understanding your local geology is important because rock type directly affects drilling cost. Hard crystalline rock (granite, gneiss) costs more to penetrate than soft sedimentary formations (sandstone, limestone) or unconsolidated deposits (sand, gravel). Your well driller can estimate costs based on nearby well logs.

Primary Aquifer

High Plains (Ogallala) Aquifer / Madison Limestone Aquifer / Paleocene Fort Union Formation / Mesaverde and Lance Formations

Water table depth: 50-200 feet on the eastern plains; 100-500 feet in intermontane basins; artesian conditions from the Madison Limestone in some areas

Best Drilling Season

May through October; extreme cold, high elevation, and deep snow severely limit winter drilling across most of the state

Population on well water: About 25% of Wyoming households use private wells, reflecting the state's vast ranching landscape and dispersed rural population

Why Well Depth Varies in Wyoming

Wells in Wyoming range from 50 to 700 feet deep. The wide range is driven by regional differences in geology, water table depth, and aquifer type. A well in one part of the state may cost significantly more or less than another area just 50 miles away.

50 ft

Shallowest typical wells

Usually in areas with high water tables, sandy soils, or alluvial aquifers near rivers

220 ft

State average depth

Typical residential well for most Wyoming locations

700 ft

Deepest typical wells

Usually in arid areas, mountain terrain, or where shallow aquifers are depleted

Wyoming Well Drilling Permits & Regulations

Wyoming does not have a state well driller licensing program — one of the few states without one. However, the State Engineer's Office enforces well construction standards, and all wells must be permitted and completed by persons familiar with the regulations.

Permit Authority

Authority
Wyoming State Engineer's Office; all wells must have an approved permit before drilling begins
Permit Cost
$50-$200

Water Rights

Doctrine
Prior Appropriation; domestic and stock wells using less than 25 gallons per minute are generally exempt from formal appropriation but must be registered with the State Engineer

Well Water Quality in Wyoming

Well water quality in Wyoming varies by location and aquifer type. Testing your water at least annually is recommended, and a comprehensive test should be done before using a new well.

Common Water Quality Issues

uranium

Treatment: reverse osmosis or ion exchange system

radium

Treatment: water softener or reverse osmosis

selenium

Treatment: appropriate treatment system

total dissolved solids

Treatment: reverse osmosis system

hardness

Treatment: water softener

sulfate

Treatment: appropriate treatment system

petroleum-related constituents near oil fields

Treatment: appropriate treatment system

Testing Recommendations

  • Before first use: Full panel including bacteria, nitrates, pH, and state-specific contaminants ($150–$500)
  • Annually: Bacteria (coliform) and nitrate testing at minimum ($50–$100)
  • After flooding or repairs: Bacteria test to confirm well integrity ($25–$50)

Get Free Well Drilling Quotes in Wyoming

Compare prices from licensed WY well drillers near you.

Well Drilling Costs by City in Wyoming

Well drilling costs vary by location within Wyoming. Select a city for local pricing details.

+ 3 more cities in Wyoming. View all

Find Well Drillers in Wyoming

We're expanding our directory of licensed well drillers in Wyoming. Browse the current listings or get matched with local pros instantly.

Are you a well driller? Add your business for free →

Wyoming Well Drilling FAQ

How deep do I need to drill a well in Wyoming?
The average residential well depth in Wyoming is 220 feet, but wells in the state range from 50 to 700 feet depending on your location and local geology. Water table depths typically range from 50-200 feet on the eastern plains; 100-500 feet in intermontane basins; artesian conditions from the Madison Limestone in some areas. A local well driller can provide a more specific estimate based on nearby well logs and geological surveys for your property.
Do I need a permit to drill a well in Wyoming?
Wyoming does not have a state well driller licensing program — one of the few states without one. However, the State Engineer's Office enforces well construction standards, and all wells must be permitted and completed by persons familiar with the regulations. Permit costs in Wyoming typically range from $50-$200. The primary regulatory authority is Wyoming State Engineer's Office; all wells must have an approved permit before drilling begins. Contact your local permitting office before drilling to confirm current requirements for your specific location.
What is the water quality like from wells in Wyoming?
Common water quality issues in Wyoming wells include uranium, radium, selenium, total dissolved solids, hardness, sulfate, petroleum-related constituents near oil fields. Testing your well water annually is recommended, and treatment systems can address most issues. A comprehensive water test costs $100–$500 and should be done before using a new well for drinking water.
What type of well is best for Wyoming?
For most Wyoming properties, a drilled well (rotary or cable tool) is the best option. Drilled wells are standard and provide the most reliable long-term water supply. Driven (sand point) wells may work in areas with shallow water tables and sandy soil, but they typically produce less water and don't last as long.
How long does it take to drill a well in Wyoming?
A typical residential well in Wyoming takes 1–3 days to drill, depending on the depth and geology. The best time to drill in Wyoming is May through October; extreme cold, high elevation, and deep snow severely limit winter drilling across most of the state. After drilling, you'll need additional time for pump installation, electrical hookup, water testing, and permitting — plan for 1–2 weeks total from start to finish.

Get Free Well Drilling Quotes in Wyoming

Compare up to 3 competitive quotes from licensed well drillers in WY. Free, no-obligation estimates.

  • Licensed & insured WY well drillers
  • Matched to your area & property
  • Compare prices before you commit

Get Free Well Drilling Quotes in Wyoming

100% free · No obligation · Licensed & insured pros

Your information is secure and never shared with third parties

Ready to Get Started?

Get matched with top Wyoming well drillers today.