2026 Cost Data · Oregon

Oregon Water Well Drilling Cost

The average residential well in Oregon is 200 feet deep and costs $8,400 in 2026. Drilling rates range from $28 to $65 per foot, with total project costs varying based on depth, geology, and pump system.

Avg. Well Depth

200 ft

Cost / Foot

$28–$65

Total Project

$8,400

vs. National

12% above avg.

Oregon Well Drilling Cost by Depth

Well Depth Drilling Only Complete System Est. Total
100 ft $2,800–$6,500 $7,600–$11,300 $9,000
150 ft $4,200–$9,750 $9,400–$14,950 $11,500
200 ft $5,600–$13,000 $11,200–$18,600 $14,000
300 ft $8,400–$19,500 $14,800–$25,900 $19,000
400 ft $11,200–$26,000 $18,400–$33,200 $24,000
500 ft $14,000–$32,500 $22,000–$40,500 $29,000

*Drilling only = drilling labor per foot. Complete system includes casing, pump, pressure tank, electrical, and permits. Costs are Oregon estimates for 2026.

Oregon Well System Component Costs

Service Low High Average
Well Casing — PVC (200 ft) $1,200 $2,200 $1,600
Well Casing — Steel (200 ft) $6,000 $26,000 $13,000
Submersible Pump $300 $2,000 $1,000
Pressure Tank $500 $2,000 $1,100
Electrical Hookup $1,000 $3,000 $1,800
Permits $150 $400 Varies
Water Quality Testing $50 $500 $200

*Component costs based on Oregon average well depth of 200 ft. Steel casing is typically required for bedrock wells; PVC is used in unconsolidated formations.

Estimate Your Well Drilling Cost in Oregon

Well Drilling Cost Calculator

Adjust the inputs to estimate your project cost

Well Type
Estimated Well Depth
200ft
50 ft800 ft
Ground Conditions
Casing Type
Include Pump & Pressure Tank?

Itemized Cost Estimate

Drilling: 200 ft × $25–$65/ft$5,000$13,000
Casing (PVC): 200 ft × $6–$11/ft$1,200$2,200
Submersible pump$750$1,600
Pressure tank$500$2,000
Electrical hookup$1,000$3,000
Permits (est.)$50$500
Water testing$50$500
Total Estimate$8,550$22,800

This estimate is 87% above the Oregon average of $8,400

Get Exact Quotes from Local Pros →

Estimates are approximate. Actual costs depend on site conditions and contractor pricing.

Get Free Well Drilling Quotes in Oregon

Compare prices from licensed OR well drillers near you.

Oregon Geology & Aquifers

Oregon's Cascade Range has volcanic basalt and andesite with highly productive but deep aquifers in fractured lava flows. The Willamette Valley has alluvial deposits over Columbia River Basalt, while eastern Oregon's high desert features Basin and Range geology with deep water tables.

Understanding your local geology is important because rock type directly affects drilling cost. Hard crystalline rock (granite, gneiss) costs more to penetrate than soft sedimentary formations (sandstone, limestone) or unconsolidated deposits (sand, gravel). Your well driller can estimate costs based on nearby well logs.

Primary Aquifer

Columbia River Basalt Group Aquifer / Willamette Valley Alluvial Aquifers / Basin and Range Volcanic Aquifers

Water table depth: 20-80 feet in the Willamette Valley; 100-400 feet in the Cascades basalt; 200-600 feet in eastern Oregon basins

Best Drilling Season

April through November west of the Cascades; May through October in eastern Oregon; heavy rains limit winter access in western Oregon

Population on well water: About 23% of Oregon households use private wells, with the highest rates in rural areas of the Willamette Valley fringe, central Oregon, and the coast

Why Well Depth Varies in Oregon

Wells in Oregon range from 40 to 600 feet deep. The wide range is driven by regional differences in geology, water table depth, and aquifer type. A well in one part of the state may cost significantly more or less than another area just 50 miles away.

40 ft

Shallowest typical wells

Usually in areas with high water tables, sandy soils, or alluvial aquifers near rivers

200 ft

State average depth

Typical residential well for most Oregon locations

600 ft

Deepest typical wells

Usually in arid areas, mountain terrain, or where shallow aquifers are depleted

Oregon Well Drilling Permits & Regulations

Oregon requires all water well constructors to be licensed by OWRD. Separate licenses exist for drilling, pump installation, and monitoring well construction. No homeowner exemption.

Permit Authority

Authority
Oregon Water Resources Department (OWRD); all wells require a start card before drilling and a well report after completion
Permit Cost
$150-$400

Water Rights

Doctrine
Prior Appropriation; exempt domestic wells may use up to 15,000 gallons per day for domestic purposes without a water right permit

Well Water Quality in Oregon

Well water quality in Oregon varies by location and aquifer type. Testing your water at least annually is recommended, and a comprehensive test should be done before using a new well.

Common Water Quality Issues

arsenic

Treatment: reverse osmosis or adsorption media filter

radon

Treatment: aeration or granular activated carbon system

iron

Treatment: iron filter or oxidation system

manganese

Treatment: oxidation filter or greensand system

nitrate in agricultural areas

Treatment: reverse osmosis or ion exchange system

naturally elevated fluoride

Treatment: reverse osmosis or activated alumina filter

Testing Recommendations

  • Before first use: Full panel including bacteria, nitrates, pH, and state-specific contaminants ($150–$500)
  • Annually: Bacteria (coliform) and nitrate testing at minimum ($50–$100)
  • After flooding or repairs: Bacteria test to confirm well integrity ($25–$50)

Get Free Well Drilling Quotes in Oregon

Compare prices from licensed OR well drillers near you.

Well Drilling Costs by City in Oregon

Well drilling costs vary by location within Oregon. Select a city for local pricing details.

Portland

OR

Eugene

OR

Salem

OR

Bend

View costs →

Medford

View costs →

+ 5 more cities in Oregon. View all

Find Well Drillers in Oregon

We're expanding our directory of licensed well drillers in Oregon. Browse the current listings or get matched with local pros instantly.

Are you a well driller? Add your business for free →

Oregon Well Drilling FAQ

How deep do I need to drill a well in Oregon?
The average residential well depth in Oregon is 200 feet, but wells in the state range from 40 to 600 feet depending on your location and local geology. Water table depths typically range from 20-80 feet in the Willamette Valley; 100-400 feet in the Cascades basalt; 200-600 feet in eastern Oregon basins. A local well driller can provide a more specific estimate based on nearby well logs and geological surveys for your property.
Do I need a permit to drill a well in Oregon?
Oregon requires all water well constructors to be licensed by OWRD. Separate licenses exist for drilling, pump installation, and monitoring well construction. No homeowner exemption. Permit costs in Oregon typically range from $150-$400. The primary regulatory authority is Oregon Water Resources Department (OWRD); all wells require a start card before drilling and a well report after completion. Contact your local permitting office before drilling to confirm current requirements for your specific location.
What is the water quality like from wells in Oregon?
Common water quality issues in Oregon wells include arsenic, radon, iron, manganese, nitrate in agricultural areas, naturally elevated fluoride. Testing your well water annually is recommended, and treatment systems can address most issues. A comprehensive water test costs $100–$500 and should be done before using a new well for drinking water.
What type of well is best for Oregon?
For most Oregon properties, a drilled well (rotary or cable tool) is the best option. The sand and gravel formations in many areas allow for both driven point wells (for shallow water tables under 30 feet) and drilled wells for deeper, more reliable supply. Driven (sand point) wells may work in areas with shallow water tables and sandy soil, but they typically produce less water and don't last as long.
How long does it take to drill a well in Oregon?
A typical residential well in Oregon takes 1–3 days to drill, depending on the depth and geology. The best time to drill in Oregon is April through November west of the Cascades; May through October in eastern Oregon; heavy rains limit winter access in western Oregon. After drilling, you'll need additional time for pump installation, electrical hookup, water testing, and permitting — plan for 1–2 weeks total from start to finish.

Get Free Well Drilling Quotes in Oregon

Compare up to 3 competitive quotes from licensed well drillers in OR. Free, no-obligation estimates.

  • Licensed & insured OR well drillers
  • Matched to your area & property
  • Compare prices before you commit

Get Free Well Drilling Quotes in Oregon

100% free · No obligation · Licensed & insured pros

Your information is secure and never shared with third parties

Ready to Get Started?

Get matched with top Oregon well drillers today.