Local 2026 Pricing · Tulare, CA

Tulare, CA Well Drilling Cost

Avg. Depth

180 ft

Cost / Foot

$32–$72

Total Project

$8,640

vs. National Avg

15% above avg.

the $7,500 national avg.

Tulare, CA Well Drilling Cost by Depth

Well Depth Drilling Only Complete System Est. Total
100 ft $3,200–$7,200 $8,000–$12,000 $9,600
150 ft $4,800–$10,800 $10,000–$16,000 $12,400
200 ft $6,400–$14,400 $12,000–$20,000 $15,200
300 ft $9,600–$21,600 $16,000–$28,000 $20,800
400 ft $12,800–$28,800 $20,000–$36,000 $26,400
500 ft $16,000–$36,000 $24,000–$44,000 $32,000

*Costs are estimates based on Tulare area rates for 2026. Complete system includes casing, pump, pressure tank, electrical, and permits. Actual prices vary by property.

Well Drilling in Tulare, CA

Former Tulare Lake basin with thick alluvial deposits; Corcoran Clay at 200-400 feet separates upper and lower aquifer systems

The average residential well in Tulare is 180 feet deep and costs approximately $8,640 for a complete system including drilling, casing, pump, and pressure tank. Drilling rates in the area range from $32 to $72 per foot, which is 15% above the national average of $7,500.

The primary aquifer serving the Tulare area is the Tulare Lake / Kaweah Subbasin Aquifer. Well depths can vary significantly depending on your specific property location and proximity to the aquifer.

Permits & Regulations

Tulare County well permit; $350-$500; SGMA management area

See our full California well drilling cost guide for permit requirements and water quality details

Get Free Well Drilling Quotes in Tulare

Compare prices from licensed CA well drillers near you.

Well Drillers in Tulare, CA

We're expanding our directory of licensed well drillers in Tulare. Get matched with local pros instantly by requesting free quotes below.

Tulare Well Drilling FAQ

How much does it cost to drill a well in Tulare, CA?
The average cost to drill a residential water well in Tulare is $8,640, based on a typical depth of 180 feet. Drilling rates in the Tulare area range from $32 to $72 per foot. Total project cost includes drilling, casing, pump installation, pressure tank, electrical hookup, and water testing.
How deep are wells in Tulare?
The average residential well depth in Tulare is 180 feet. Actual depth depends on your specific property location, elevation, and proximity to the Tulare Lake / Kaweah Subbasin Aquifer. A local well driller can estimate the depth needed for your property based on nearby well logs and geological data.
Do I need a permit to drill a well near Tulare?
Tulare County well permit; $350-$500; SGMA management area For detailed California permit requirements, licensing rules, and water rights information, see our full California well drilling cost guide.
How long does it take to drill a well in Tulare?
Most residential wells in the Tulare area take 1–3 days to drill, depending on depth and local geology. The complete project — including pump installation, electrical hookup, water testing, and permitting — typically takes 1–2 weeks from start to finish. Scheduling availability with local drillers may add additional lead time.

Nearby Areas

Also serving: Visalia , Porterville , Lindsay, Dinuba, Woodlake

Get Free Quotes in Tulare

Compare up to 3 competitive quotes from licensed well drillers in the Tulare, CA area. Free, no-obligation estimates.

  • Licensed & insured CA well drillers
  • Matched to your area & property
  • Compare prices before you commit

Get Free Well Drilling Quotes in Tulare

100% free · No obligation · Licensed & insured pros

Your information is secure and never shared with third parties

Ready to Get Started?

Get matched with top Tulare well drillers today.