Local 2026 Pricing · Milledgeville, GA

Milledgeville, GA Well Drilling Cost

Avg. Depth

160 ft

Cost / Foot

$22–$52

Total Project

$5,600

vs. National Avg

25% below avg.

the $7,500 national avg.

Milledgeville, GA Well Drilling Cost by Depth

Well Depth Drilling Only Complete System Est. Total
100 ft $2,200–$5,200 $7,000–$10,000 $8,300
150 ft $3,300–$7,800 $8,500–$13,000 $10,450
200 ft $4,400–$10,400 $10,000–$16,000 $12,600
300 ft $6,600–$15,600 $13,000–$22,000 $16,900
400 ft $8,800–$20,800 $16,000–$28,000 $21,200
500 ft $11,000–$26,000 $19,000–$34,000 $25,500

*Costs are estimates based on Milledgeville area rates for 2026. Complete system includes casing, pump, pressure tank, electrical, and permits. Actual prices vary by property.

Well Drilling in Milledgeville, GA

Fall Line transition from Piedmont to Coastal Plain; Cretaceous sand formations begin appearing east of town providing better aquifer conditions

The average residential well in Milledgeville is 160 feet deep and costs approximately $5,600 for a complete system including drilling, casing, pump, and pressure tank. Drilling rates in the area range from $22 to $52 per foot, which is 25% below the national average of $7,500.

The primary aquifer serving the Milledgeville area is the Piedmont / Cretaceous Sand Aquifer. Well depths can vary significantly depending on your specific property location and proximity to the aquifer.

Permits & Regulations

Baldwin County well permit; Georgia EPD; $75-$100

See our full Georgia well drilling cost guide for permit requirements and water quality details

Get Free Well Drilling Quotes in Milledgeville

Compare prices from licensed GA well drillers near you.

Well Drillers in Milledgeville, GA

We're expanding our directory of licensed well drillers in Milledgeville. Get matched with local pros instantly by requesting free quotes below.

Milledgeville Well Drilling FAQ

How much does it cost to drill a well in Milledgeville, GA?
The average cost to drill a residential water well in Milledgeville is $5,600, based on a typical depth of 160 feet. Drilling rates in the Milledgeville area range from $22 to $52 per foot. Total project cost includes drilling, casing, pump installation, pressure tank, electrical hookup, and water testing.
How deep are wells in Milledgeville?
The average residential well depth in Milledgeville is 160 feet. Actual depth depends on your specific property location, elevation, and proximity to the Piedmont / Cretaceous Sand Aquifer. A local well driller can estimate the depth needed for your property based on nearby well logs and geological data.
Do I need a permit to drill a well near Milledgeville?
Baldwin County well permit; Georgia EPD; $75-$100 For detailed Georgia permit requirements, licensing rules, and water rights information, see our full Georgia well drilling cost guide.
How long does it take to drill a well in Milledgeville?
Most residential wells in the Milledgeville area take 1–3 days to drill, depending on depth and local geology. The complete project — including pump installation, electrical hookup, water testing, and permitting — typically takes 1–2 weeks from start to finish. Scheduling availability with local drillers may add additional lead time.

Nearby Areas

Also serving: Eatonton , Gray, Sandersville, Sparta, Gordon

Get Free Quotes in Milledgeville

Compare up to 3 competitive quotes from licensed well drillers in the Milledgeville, GA area. Free, no-obligation estimates.

  • Licensed & insured GA well drillers
  • Matched to your area & property
  • Compare prices before you commit

Get Free Well Drilling Quotes in Milledgeville

100% free · No obligation · Licensed & insured pros

Your information is secure and never shared with third parties

Ready to Get Started?

Get matched with top Milledgeville well drillers today.