Local 2026 Pricing · Marble Falls, TX

Marble Falls, TX Well Drilling Cost

Avg. Depth

280 ft

Cost / Foot

$26–$62

Total Project

$11,760

vs. National Avg

57% above avg.

the $7,500 national avg.

Marble Falls, TX Well Drilling Cost by Depth

Well Depth Drilling Only Complete System Est. Total
100 ft $2,600–$6,200 $7,400–$11,000 $9,000
150 ft $3,900–$9,300 $9,100–$14,500 $11,500
200 ft $5,200–$12,400 $10,800–$18,000 $14,000
300 ft $7,800–$18,600 $14,200–$25,000 $19,000
400 ft $10,400–$24,800 $17,600–$32,000 $24,000
500 ft $13,000–$31,000 $21,000–$39,000 $29,000

*Costs are estimates based on Marble Falls area rates for 2026. Complete system includes casing, pump, pressure tank, electrical, and permits. Actual prices vary by property.

Well Drilling in Marble Falls, TX

Burnet County on the Llano Uplift margin; Marble Falls Formation limestone and Precambrian granite create complex local geology

The average residential well in Marble Falls is 280 feet deep and costs approximately $11,760 for a complete system including drilling, casing, pump, and pressure tank. Drilling rates in the area range from $26 to $62 per foot, which is 57% above the national average of $7,500.

The primary aquifer serving the Marble Falls area is the Marble Falls / Ellenburger Aquifer. Well depths can vary significantly depending on your specific property location and proximity to the aquifer.

Permits & Regulations

Burnet County; no active GCD; TCEQ registration; $100-$150

See our full Texas well drilling cost guide for permit requirements and water quality details

Get Free Well Drilling Quotes in Marble Falls

Compare prices from licensed TX well drillers near you.

Well Drillers in Marble Falls, TX

We're expanding our directory of licensed well drillers in Marble Falls. Get matched with local pros instantly by requesting free quotes below.

Marble Falls Well Drilling FAQ

How much does it cost to drill a well in Marble Falls, TX?
The average cost to drill a residential water well in Marble Falls is $11,760, based on a typical depth of 280 feet. Drilling rates in the Marble Falls area range from $26 to $62 per foot. Total project cost includes drilling, casing, pump installation, pressure tank, electrical hookup, and water testing.
How deep are wells in Marble Falls?
The average residential well depth in Marble Falls is 280 feet. Actual depth depends on your specific property location, elevation, and proximity to the Marble Falls / Ellenburger Aquifer. A local well driller can estimate the depth needed for your property based on nearby well logs and geological data.
Do I need a permit to drill a well near Marble Falls?
Burnet County; no active GCD; TCEQ registration; $100-$150 For detailed Texas permit requirements, licensing rules, and water rights information, see our full Texas well drilling cost guide.
How long does it take to drill a well in Marble Falls?
Most residential wells in the Marble Falls area take 1–3 days to drill, depending on depth and local geology. The complete project — including pump installation, electrical hookup, water testing, and permitting — typically takes 1–2 weeks from start to finish. Scheduling availability with local drillers may add additional lead time.

Nearby Areas

Also serving: Granite Shoals, Horseshoe Bay, Kingsland, Burnet, Spicewood

Get Free Quotes in Marble Falls

Compare up to 3 competitive quotes from licensed well drillers in the Marble Falls, TX area. Free, no-obligation estimates.

  • Licensed & insured TX well drillers
  • Matched to your area & property
  • Compare prices before you commit

Get Free Well Drilling Quotes in Marble Falls

100% free · No obligation · Licensed & insured pros

Your information is secure and never shared with third parties

Ready to Get Started?

Get matched with top Marble Falls well drillers today.