Local 2026 Pricing · Lufkin, TX

Lufkin, TX Well Drilling Cost

Avg. Depth

180 ft

Cost / Foot

$22–$50

Total Project

$6,300

vs. National Avg

16% below avg.

the $7,500 national avg.

Lufkin, TX Well Drilling Cost by Depth

Well Depth Drilling Only Complete System Est. Total
100 ft $2,200–$5,000 $7,000–$9,800 $8,300
150 ft $3,300–$7,500 $8,500–$12,700 $10,450
200 ft $4,400–$10,000 $10,000–$15,600 $12,600
300 ft $6,600–$15,000 $13,000–$21,400 $16,900
400 ft $8,800–$20,000 $16,000–$27,200 $21,200
500 ft $11,000–$25,000 $19,000–$33,000 $25,500

*Costs are estimates based on Lufkin area rates for 2026. Complete system includes casing, pump, pressure tank, electrical, and permits. Actual prices vary by property.

Well Drilling in Lufkin, TX

East Texas Piney Woods with Carrizo-Wilcox aquifer sand formations. Shallow wells (50-150 ft) tap the Carrizo Sand aquifer, while deeper wells (200-400 ft) reach the Wilcox Group. Sandy soil makes drilling relatively straightforward compared to the Hill Country limestone.

The average residential well in Lufkin is 180 feet deep and costs approximately $6,300 for a complete system including drilling, casing, pump, and pressure tank. Drilling rates in the area range from $22 to $50 per foot, which is 16% below the national average of $7,500.

The primary aquifer serving the Lufkin area is the Carrizo-Wilcox Aquifer. Well depths can vary significantly depending on your specific property location and proximity to the aquifer.

Permits & Regulations

Angelina County; no active Groundwater Conservation District; TCEQ registration required for domestic wells; permit cost $100-$150. Wells must meet Texas minimum construction standards.

See our full Texas well drilling cost guide for permit requirements and water quality details

Get Free Well Drilling Quotes in Lufkin

Compare prices from licensed TX well drillers near you.

Well Drillers in Lufkin, TX

We're expanding our directory of licensed well drillers in Lufkin. Get matched with local pros instantly by requesting free quotes below.

Lufkin Well Drilling FAQ

How much does it cost to drill a well in Lufkin, TX?
The average cost to drill a residential water well in Lufkin is $6,300, based on a typical depth of 180 feet. Drilling rates in the Lufkin area range from $22 to $50 per foot. Total project cost includes drilling, casing, pump installation, pressure tank, electrical hookup, and water testing.
How deep are wells in Lufkin?
The average residential well depth in Lufkin is 180 feet. Actual depth depends on your specific property location, elevation, and proximity to the Carrizo-Wilcox Aquifer. A local well driller can estimate the depth needed for your property based on nearby well logs and geological data.
Do I need a permit to drill a well near Lufkin?
Angelina County; no active Groundwater Conservation District; TCEQ registration required for domestic wells; permit cost $100-$150. Wells must meet Texas minimum construction standards. For detailed Texas permit requirements, licensing rules, and water rights information, see our full Texas well drilling cost guide.
How long does it take to drill a well in Lufkin?
Most residential wells in the Lufkin area take 1–3 days to drill, depending on depth and local geology. The complete project — including pump installation, electrical hookup, water testing, and permitting — typically takes 1–2 weeks from start to finish. Scheduling availability with local drillers may add additional lead time.

Nearby Areas

Also serving: Nacogdoches , Diboll, Hudson, Huntington, Zavalla

Get Free Quotes in Lufkin

Compare up to 3 competitive quotes from licensed well drillers in the Lufkin, TX area. Free, no-obligation estimates.

  • Licensed & insured TX well drillers
  • Matched to your area & property
  • Compare prices before you commit

Get Free Well Drilling Quotes in Lufkin

100% free · No obligation · Licensed & insured pros

Your information is secure and never shared with third parties

Ready to Get Started?

Get matched with top Lufkin well drillers today.