Local 2026 Pricing · Kenai, AK

Kenai, AK Well Drilling Cost

Avg. Depth

55 ft

Cost / Foot

$42–$88

Total Project

$3,300

vs. National Avg

56% below avg.

the $7,500 national avg.

Kenai, AK Well Drilling Cost by Depth

Well Depth Drilling Only Complete System Est. Total
100 ft $4,200–$8,800 $9,000–$13,600 $10,800
150 ft $6,300–$13,200 $11,500–$18,400 $14,200
200 ft $8,400–$17,600 $14,000–$23,200 $17,600
300 ft $12,600–$26,400 $19,000–$32,800 $24,400
400 ft $16,800–$35,200 $24,000–$42,400 $31,200
500 ft $21,000–$44,000 $29,000–$52,000 $38,000

*Costs are estimates based on Kenai area rates for 2026. Complete system includes casing, pump, pressure tank, electrical, and permits. Actual prices vary by property.

Well Drilling in Kenai, AK

Quaternary glacial and alluvial deposits along the Kenai River; sandy gravel layers provide reliable shallow wells

The average residential well in Kenai is 55 feet deep and costs approximately $3,300 for a complete system including drilling, casing, pump, and pressure tank. Drilling rates in the area range from $42 to $88 per foot, which is 56% below the national average of $7,500.

The primary aquifer serving the Kenai area is the Kenai Peninsula Glacial Aquifer. Well depths can vary significantly depending on your specific property location and proximity to the aquifer.

Permits & Regulations

Kenai Peninsula Borough permit required; Alaska DEC notification; $100-$150

See our full Alaska well drilling cost guide for permit requirements and water quality details

Get Free Well Drilling Quotes in Kenai

Compare prices from licensed AK well drillers near you.

Well Drillers in Kenai, AK

We're expanding our directory of licensed well drillers in Kenai. Get matched with local pros instantly by requesting free quotes below.

Kenai Well Drilling FAQ

How much does it cost to drill a well in Kenai, AK?
The average cost to drill a residential water well in Kenai is $3,300, based on a typical depth of 55 feet. Drilling rates in the Kenai area range from $42 to $88 per foot. Total project cost includes drilling, casing, pump installation, pressure tank, electrical hookup, and water testing.
How deep are wells in Kenai?
The average residential well depth in Kenai is 55 feet. Actual depth depends on your specific property location, elevation, and proximity to the Kenai Peninsula Glacial Aquifer. A local well driller can estimate the depth needed for your property based on nearby well logs and geological data.
Do I need a permit to drill a well near Kenai?
Kenai Peninsula Borough permit required; Alaska DEC notification; $100-$150 For detailed Alaska permit requirements, licensing rules, and water rights information, see our full Alaska well drilling cost guide.
How long does it take to drill a well in Kenai?
Most residential wells in the Kenai area take 1–3 days to drill, depending on depth and local geology. The complete project — including pump installation, electrical hookup, water testing, and permitting — typically takes 1–2 weeks from start to finish. Scheduling availability with local drillers may add additional lead time.

Nearby Areas

Also serving: Soldotna, Nikiski, Sterling, Kasilof, Funny River

Get Free Quotes in Kenai

Compare up to 3 competitive quotes from licensed well drillers in the Kenai, AK area. Free, no-obligation estimates.

  • Licensed & insured AK well drillers
  • Matched to your area & property
  • Compare prices before you commit

Get Free Well Drilling Quotes in Kenai

100% free · No obligation · Licensed & insured pros

Your information is secure and never shared with third parties

Ready to Get Started?

Get matched with top Kenai well drillers today.