Local 2026 Pricing · Edmond, OK

Edmond, OK Well Drilling Cost

Avg. Depth

150 ft

Cost / Foot

$22–$50

Total Project

$5,100

vs. National Avg

32% below avg.

the $7,500 national avg.

Edmond, OK Well Drilling Cost by Depth

Well Depth Drilling Only Complete System Est. Total
100 ft $2,200–$5,000 $7,000–$9,800 $8,200
150 ft $3,300–$7,500 $8,500–$12,700 $10,300
200 ft $4,400–$10,000 $10,000–$15,600 $12,400
300 ft $6,600–$15,000 $13,000–$21,400 $16,600
400 ft $8,800–$20,000 $16,000–$27,200 $20,800
500 ft $11,000–$25,000 $19,000–$33,000 $25,000

*Costs are estimates based on Edmond area rates for 2026. Complete system includes casing, pump, pressure tank, electrical, and permits. Actual prices vary by property.

Well Drilling in Edmond, OK

Northern Oklahoma County with Garber-Wellington Formation; arsenic naturally occurring in some zones of this aquifer

The average residential well in Edmond is 150 feet deep and costs approximately $5,100 for a complete system including drilling, casing, pump, and pressure tank. Drilling rates in the area range from $22 to $50 per foot, which is 32% below the national average of $7,500.

The primary aquifer serving the Edmond area is the Central Oklahoma / Garber-Wellington Aquifer. Well depths can vary significantly depending on your specific property location and proximity to the aquifer.

Permits & Regulations

Oklahoma County well permit; OWRB; $50-$100; arsenic testing recommended for Garber-Wellington wells

See our full Oklahoma well drilling cost guide for permit requirements and water quality details

Get Free Well Drilling Quotes in Edmond

Compare prices from licensed OK well drillers near you.

Well Drillers in Edmond, OK

We're expanding our directory of licensed well drillers in Edmond. Get matched with local pros instantly by requesting free quotes below.

Edmond Well Drilling FAQ

How much does it cost to drill a well in Edmond, OK?
The average cost to drill a residential water well in Edmond is $5,100, based on a typical depth of 150 feet. Drilling rates in the Edmond area range from $22 to $50 per foot. Total project cost includes drilling, casing, pump installation, pressure tank, electrical hookup, and water testing.
How deep are wells in Edmond?
The average residential well depth in Edmond is 150 feet. Actual depth depends on your specific property location, elevation, and proximity to the Central Oklahoma / Garber-Wellington Aquifer. A local well driller can estimate the depth needed for your property based on nearby well logs and geological data.
Do I need a permit to drill a well near Edmond?
Oklahoma County well permit; OWRB; $50-$100; arsenic testing recommended for Garber-Wellington wells For detailed Oklahoma permit requirements, licensing rules, and water rights information, see our full Oklahoma well drilling cost guide.
How long does it take to drill a well in Edmond?
Most residential wells in the Edmond area take 1–3 days to drill, depending on depth and local geology. The complete project — including pump installation, electrical hookup, water testing, and permitting — typically takes 1–2 weeks from start to finish. Scheduling availability with local drillers may add additional lead time.

Nearby Areas

Also serving: Guthrie , Deer Creek, Piedmont, Arcadia, Luther

Get Free Quotes in Edmond

Compare up to 3 competitive quotes from licensed well drillers in the Edmond, OK area. Free, no-obligation estimates.

  • Licensed & insured OK well drillers
  • Matched to your area & property
  • Compare prices before you commit

Get Free Well Drilling Quotes in Edmond

100% free · No obligation · Licensed & insured pros

Your information is secure and never shared with third parties

Ready to Get Started?

Get matched with top Edmond well drillers today.