Local 2026 Pricing · Dickson, TN

Dickson, TN Well Drilling Cost

Avg. Depth

170 ft

Cost / Foot

$22–$52

Total Project

$6,120

vs. National Avg

18% below avg.

the $7,500 national avg.

Dickson, TN Well Drilling Cost by Depth

Well Depth Drilling Only Complete System Est. Total
100 ft $2,200–$5,200 $7,000–$10,000 $8,400
150 ft $3,300–$7,800 $8,500–$13,000 $10,600
200 ft $4,400–$10,400 $10,000–$16,000 $12,800
300 ft $6,600–$15,600 $13,000–$22,000 $17,200
400 ft $8,800–$20,800 $16,000–$28,000 $21,600
500 ft $11,000–$26,000 $19,000–$34,000 $26,000

*Costs are estimates based on Dickson area rates for 2026. Complete system includes casing, pump, pressure tank, electrical, and permits. Actual prices vary by property.

Well Drilling in Dickson, TN

Dickson County Western Highland Rim with Mississippian Warsaw and Fort Payne Formations; Jones Creek and Piney River drainages

The average residential well in Dickson is 170 feet deep and costs approximately $6,120 for a complete system including drilling, casing, pump, and pressure tank. Drilling rates in the area range from $22 to $52 per foot, which is 18% below the national average of $7,500.

The primary aquifer serving the Dickson area is the Highland Rim / Warsaw-Fort Payne Aquifer. Well depths can vary significantly depending on your specific property location and proximity to the aquifer.

Permits & Regulations

Dickson County well permit; TN TDEC; $50-$75

See our full Tennessee well drilling cost guide for permit requirements and water quality details

Get Free Well Drilling Quotes in Dickson

Compare prices from licensed TN well drillers near you.

Well Drillers in Dickson, TN

We're expanding our directory of licensed well drillers in Dickson. Get matched with local pros instantly by requesting free quotes below.

Dickson Well Drilling FAQ

How much does it cost to drill a well in Dickson, TN?
The average cost to drill a residential water well in Dickson is $6,120, based on a typical depth of 170 feet. Drilling rates in the Dickson area range from $22 to $52 per foot. Total project cost includes drilling, casing, pump installation, pressure tank, electrical hookup, and water testing.
How deep are wells in Dickson?
The average residential well depth in Dickson is 170 feet. Actual depth depends on your specific property location, elevation, and proximity to the Highland Rim / Warsaw-Fort Payne Aquifer. A local well driller can estimate the depth needed for your property based on nearby well logs and geological data.
Do I need a permit to drill a well near Dickson?
Dickson County well permit; TN TDEC; $50-$75 For detailed Tennessee permit requirements, licensing rules, and water rights information, see our full Tennessee well drilling cost guide.
How long does it take to drill a well in Dickson?
Most residential wells in the Dickson area take 1–3 days to drill, depending on depth and local geology. The complete project — including pump installation, electrical hookup, water testing, and permitting — typically takes 1–2 weeks from start to finish. Scheduling availability with local drillers may add additional lead time.

Nearby Areas

Also serving: White Bluff, Burns, Charlotte, Vanleer, McEwen

Get Free Quotes in Dickson

Compare up to 3 competitive quotes from licensed well drillers in the Dickson, TN area. Free, no-obligation estimates.

  • Licensed & insured TN well drillers
  • Matched to your area & property
  • Compare prices before you commit

Get Free Well Drilling Quotes in Dickson

100% free · No obligation · Licensed & insured pros

Your information is secure and never shared with third parties

Ready to Get Started?

Get matched with top Dickson well drillers today.