Local 2026 Pricing · Concord, NH

Concord, NH Well Drilling Cost

Avg. Depth

250 ft

Cost / Foot

$32–$74

Total Project

$12,500

vs. National Avg

67% above avg.

the $7,500 national avg.

Concord, NH Well Drilling Cost by Depth

Well Depth Drilling Only Complete System Est. Total
100 ft $3,200–$7,400 $8,000–$12,200 $9,800
150 ft $4,800–$11,100 $10,000–$16,300 $12,700
200 ft $6,400–$14,800 $12,000–$20,400 $15,600
300 ft $9,600–$22,200 $16,000–$28,600 $21,400
400 ft $12,800–$29,600 $20,000–$36,800 $27,200
500 ft $16,000–$37,000 $24,000–$45,000 $33,000

*Costs are estimates based on Concord area rates for 2026. Complete system includes casing, pump, pressure tank, electrical, and permits. Actual prices vary by property.

Well Drilling in Concord, NH

Merrimack River valley with glacial stratified drift over metamorphic bedrock; sand and gravel aquifers along river corridor; upland areas need bedrock wells

The average residential well in Concord is 250 feet deep and costs approximately $12,500 for a complete system including drilling, casing, pump, and pressure tank. Drilling rates in the area range from $32 to $74 per foot, which is 67% above the national average of $7,500.

The primary aquifer serving the Concord area is the Merrimack Valley Stratified Drift / Crystalline Bedrock Aquifer. Well depths can vary significantly depending on your specific property location and proximity to the aquifer.

Permits & Regulations

Concord requires well permits; NH DES well program; $100-$200

See our full New Hampshire well drilling cost guide for permit requirements and water quality details

Get Free Well Drilling Quotes in Concord

Compare prices from licensed NH well drillers near you.

Well Drillers in Concord, NH

We're expanding our directory of licensed well drillers in Concord. Get matched with local pros instantly by requesting free quotes below.

Concord Well Drilling FAQ

How much does it cost to drill a well in Concord, NH?
The average cost to drill a residential water well in Concord is $12,500, based on a typical depth of 250 feet. Drilling rates in the Concord area range from $32 to $74 per foot. Total project cost includes drilling, casing, pump installation, pressure tank, electrical hookup, and water testing.
How deep are wells in Concord?
The average residential well depth in Concord is 250 feet. Actual depth depends on your specific property location, elevation, and proximity to the Merrimack Valley Stratified Drift / Crystalline Bedrock Aquifer. A local well driller can estimate the depth needed for your property based on nearby well logs and geological data.
Do I need a permit to drill a well near Concord?
Concord requires well permits; NH DES well program; $100-$200 For detailed New Hampshire permit requirements, licensing rules, and water rights information, see our full New Hampshire well drilling cost guide.
How long does it take to drill a well in Concord?
Most residential wells in the Concord area take 1–3 days to drill, depending on depth and local geology. The complete project — including pump installation, electrical hookup, water testing, and permitting — typically takes 1–2 weeks from start to finish. Scheduling availability with local drillers may add additional lead time.

Nearby Areas

Also serving: Bow, Loudon, Canterbury, Pembroke, Hopkinton

Get Free Quotes in Concord

Compare up to 3 competitive quotes from licensed well drillers in the Concord, NH area. Free, no-obligation estimates.

  • Licensed & insured NH well drillers
  • Matched to your area & property
  • Compare prices before you commit

Get Free Well Drilling Quotes in Concord

100% free · No obligation · Licensed & insured pros

Your information is secure and never shared with third parties

Ready to Get Started?

Get matched with top Concord well drillers today.