Local 2026 Pricing · Comfort, TX

Comfort, TX Well Drilling Cost

Avg. Depth

310 ft

Cost / Foot

$26–$62

Total Project

$13,020

vs. National Avg

74% above avg.

the $7,500 national avg.

Comfort, TX Well Drilling Cost by Depth

Well Depth Drilling Only Complete System Est. Total
100 ft $2,600–$6,200 $7,400–$11,000 $9,000
150 ft $3,900–$9,300 $9,100–$14,500 $11,500
200 ft $5,200–$12,400 $10,800–$18,000 $14,000
300 ft $7,800–$18,600 $14,200–$25,000 $19,000
400 ft $10,400–$24,800 $17,600–$32,000 $24,000
500 ft $13,000–$31,000 $21,000–$39,000 $29,000

*Costs are estimates based on Comfort area rates for 2026. Complete system includes casing, pump, pressure tank, electrical, and permits. Actual prices vary by property.

Well Drilling in Comfort, TX

Kendall County Hill Country with Lower Cretaceous formations; Cypress Creek and Guadalupe River confluence area; classic karst limestone terrain

The average residential well in Comfort is 310 feet deep and costs approximately $13,020 for a complete system including drilling, casing, pump, and pressure tank. Drilling rates in the area range from $26 to $62 per foot, which is 74% above the national average of $7,500.

The primary aquifer serving the Comfort area is the Trinity / Lower Trinity Aquifer. Well depths can vary significantly depending on your specific property location and proximity to the aquifer.

Permits & Regulations

Kendall County; TCEQ registration; $100-$150; small-town Hill Country with longstanding well tradition

See our full Texas well drilling cost guide for permit requirements and water quality details

Get Free Well Drilling Quotes in Comfort

Compare prices from licensed TX well drillers near you.

Well Drillers in Comfort, TX

We're expanding our directory of licensed well drillers in Comfort. Get matched with local pros instantly by requesting free quotes below.

Comfort Well Drilling FAQ

How much does it cost to drill a well in Comfort, TX?
The average cost to drill a residential water well in Comfort is $13,020, based on a typical depth of 310 feet. Drilling rates in the Comfort area range from $26 to $62 per foot. Total project cost includes drilling, casing, pump installation, pressure tank, electrical hookup, and water testing.
How deep are wells in Comfort?
The average residential well depth in Comfort is 310 feet. Actual depth depends on your specific property location, elevation, and proximity to the Trinity / Lower Trinity Aquifer. A local well driller can estimate the depth needed for your property based on nearby well logs and geological data.
Do I need a permit to drill a well near Comfort?
Kendall County; TCEQ registration; $100-$150; small-town Hill Country with longstanding well tradition For detailed Texas permit requirements, licensing rules, and water rights information, see our full Texas well drilling cost guide.
How long does it take to drill a well in Comfort?
Most residential wells in the Comfort area take 1–3 days to drill, depending on depth and local geology. The complete project — including pump installation, electrical hookup, water testing, and permitting — typically takes 1–2 weeks from start to finish. Scheduling availability with local drillers may add additional lead time.

Nearby Areas

Also serving: Boerne , Center Point, Sisterdale, Waring, Camp Verde

Get Free Quotes in Comfort

Compare up to 3 competitive quotes from licensed well drillers in the Comfort, TX area. Free, no-obligation estimates.

  • Licensed & insured TX well drillers
  • Matched to your area & property
  • Compare prices before you commit

Get Free Well Drilling Quotes in Comfort

100% free · No obligation · Licensed & insured pros

Your information is secure and never shared with third parties

Ready to Get Started?

Get matched with top Comfort well drillers today.