Local 2026 Pricing · Columbus, MS

Columbus, MS Well Drilling Cost

Avg. Depth

120 ft

Cost / Foot

$22–$50

Total Project

$4,080

vs. National Avg

46% below avg.

the $7,500 national avg.

Columbus, MS Well Drilling Cost by Depth

Well Depth Drilling Only Complete System Est. Total
100 ft $2,200–$5,000 $7,000–$9,800 $8,200
150 ft $3,300–$7,500 $8,500–$12,700 $10,300
200 ft $4,400–$10,000 $10,000–$15,600 $12,400
300 ft $6,600–$15,000 $13,000–$21,400 $16,600
400 ft $8,800–$20,000 $16,000–$27,200 $20,800
500 ft $11,000–$25,000 $19,000–$33,000 $25,000

*Costs are estimates based on Columbus area rates for 2026. Complete system includes casing, pump, pressure tank, electrical, and permits. Actual prices vary by property.

Well Drilling in Columbus, MS

Tombigbee River valley with alluvial deposits over Cretaceous formations; river corridor wells can be shallower than upland wells

The average residential well in Columbus is 120 feet deep and costs approximately $4,080 for a complete system including drilling, casing, pump, and pressure tank. Drilling rates in the area range from $22 to $50 per foot, which is 46% below the national average of $7,500.

The primary aquifer serving the Columbus area is the Tombigbee Alluvial / Eutaw Aquifer. Well depths can vary significantly depending on your specific property location and proximity to the aquifer.

Permits & Regulations

Lowndes County; MS Dept of Health well permit; $50

See our full Mississippi well drilling cost guide for permit requirements and water quality details

Get Free Well Drilling Quotes in Columbus

Compare prices from licensed MS well drillers near you.

Well Drillers in Columbus, MS

We're expanding our directory of licensed well drillers in Columbus. Get matched with local pros instantly by requesting free quotes below.

Columbus Well Drilling FAQ

How much does it cost to drill a well in Columbus, MS?
The average cost to drill a residential water well in Columbus is $4,080, based on a typical depth of 120 feet. Drilling rates in the Columbus area range from $22 to $50 per foot. Total project cost includes drilling, casing, pump installation, pressure tank, electrical hookup, and water testing.
How deep are wells in Columbus?
The average residential well depth in Columbus is 120 feet. Actual depth depends on your specific property location, elevation, and proximity to the Tombigbee Alluvial / Eutaw Aquifer. A local well driller can estimate the depth needed for your property based on nearby well logs and geological data.
Do I need a permit to drill a well near Columbus?
Lowndes County; MS Dept of Health well permit; $50 For detailed Mississippi permit requirements, licensing rules, and water rights information, see our full Mississippi well drilling cost guide.
How long does it take to drill a well in Columbus?
Most residential wells in the Columbus area take 1–3 days to drill, depending on depth and local geology. The complete project — including pump installation, electrical hookup, water testing, and permitting — typically takes 1–2 weeks from start to finish. Scheduling availability with local drillers may add additional lead time.

Nearby Areas

Also serving: Caledonia, New Hope, Steens, Crawford, Artesia

Get Free Quotes in Columbus

Compare up to 3 competitive quotes from licensed well drillers in the Columbus, MS area. Free, no-obligation estimates.

  • Licensed & insured MS well drillers
  • Matched to your area & property
  • Compare prices before you commit

Get Free Well Drilling Quotes in Columbus

100% free · No obligation · Licensed & insured pros

Your information is secure and never shared with third parties

Ready to Get Started?

Get matched with top Columbus well drillers today.