Local 2026 Pricing · Chelan, WA

Chelan, WA Well Drilling Cost

Avg. Depth

200 ft

Cost / Foot

$28–$64

Total Project

$8,800

vs. National Avg

17% above avg.

the $7,500 national avg.

Chelan, WA Well Drilling Cost by Depth

Well Depth Drilling Only Complete System Est. Total
100 ft $2,800–$6,400 $7,600–$11,200 $9,200
150 ft $4,200–$9,600 $9,400–$14,800 $11,800
200 ft $5,600–$12,800 $11,200–$18,400 $14,400
300 ft $8,400–$19,200 $14,800–$25,600 $19,600
400 ft $11,200–$25,600 $18,400–$32,800 $24,800
500 ft $14,000–$32,000 $22,000–$40,000 $30,000

*Costs are estimates based on Chelan area rates for 2026. Complete system includes casing, pump, pressure tank, electrical, and permits. Actual prices vary by property.

Well Drilling in Chelan, WA

Lake Chelan moraine and alluvial deposits; glacially carved valley over metamorphic basement rock; lake provides some local recharge

The average residential well in Chelan is 200 feet deep and costs approximately $8,800 for a complete system including drilling, casing, pump, and pressure tank. Drilling rates in the area range from $28 to $64 per foot, which is 17% above the national average of $7,500.

The primary aquifer serving the Chelan area is the Lake Chelan / Crystalline Bedrock Aquifer. Well depths can vary significantly depending on your specific property location and proximity to the aquifer.

Permits & Regulations

Chelan County well permit; WA Ecology; $150-$300; steep terrain limits well site options

See our full Washington well drilling cost guide for permit requirements and water quality details

Get Free Well Drilling Quotes in Chelan

Compare prices from licensed WA well drillers near you.

Well Drillers in Chelan, WA

We're expanding our directory of licensed well drillers in Chelan. Get matched with local pros instantly by requesting free quotes below.

Chelan Well Drilling FAQ

How much does it cost to drill a well in Chelan, WA?
The average cost to drill a residential water well in Chelan is $8,800, based on a typical depth of 200 feet. Drilling rates in the Chelan area range from $28 to $64 per foot. Total project cost includes drilling, casing, pump installation, pressure tank, electrical hookup, and water testing.
How deep are wells in Chelan?
The average residential well depth in Chelan is 200 feet. Actual depth depends on your specific property location, elevation, and proximity to the Lake Chelan / Crystalline Bedrock Aquifer. A local well driller can estimate the depth needed for your property based on nearby well logs and geological data.
Do I need a permit to drill a well near Chelan?
Chelan County well permit; WA Ecology; $150-$300; steep terrain limits well site options For detailed Washington permit requirements, licensing rules, and water rights information, see our full Washington well drilling cost guide.
How long does it take to drill a well in Chelan?
Most residential wells in the Chelan area take 1–3 days to drill, depending on depth and local geology. The complete project — including pump installation, electrical hookup, water testing, and permitting — typically takes 1–2 weeks from start to finish. Scheduling availability with local drillers may add additional lead time.

Nearby Areas

Also serving: Manson, Entiat, Wenatchee , Leavenworth , Cashmere

Get Free Quotes in Chelan

Compare up to 3 competitive quotes from licensed well drillers in the Chelan, WA area. Free, no-obligation estimates.

  • Licensed & insured WA well drillers
  • Matched to your area & property
  • Compare prices before you commit

Get Free Well Drilling Quotes in Chelan

100% free · No obligation · Licensed & insured pros

Your information is secure and never shared with third parties

Ready to Get Started?

Get matched with top Chelan well drillers today.