Local 2026 Pricing · Ashland, OH

Ashland, OH Well
Drilling Cost

Avg. Depth

140 ft

Cost / Foot

$24–$54

Total Project

$5,040

vs. National Avg

33% below avg.

the $7,500 national avg.

Get Free Quotes in Ashland

Ashland, OH Well Drilling Cost by Depth

Well Depth	Drilling Only	Complete System	Est. Total
100 ft	$2,400–$5,400	$7,200–$10,200	$8,400
150 ft	$3,600–$8,100	$8,800–$13,300	$10,600
200 ft	$4,800–$10,800	$10,400–$16,400	$12,800
300 ft	$7,200–$16,200	$13,600–$22,600	$17,200
400 ft	$9,600–$21,600	$16,800–$28,800	$21,600
500 ft	$12,000–$27,000	$20,000–$35,000	$26,000

*Costs are estimates based on Ashland area rates for 2026. Complete system includes casing, pump, pressure tank, electrical, and permits. Actual prices vary by property.

Well Drilling in Ashland, OH

Ashland County glaciated terrain with Jerome Fork and Muddy Fork valleys; Berea Sandstone beneath glacial drift provides reliable aquifer

The average residential well in Ashland is 140 feet deep and costs approximately $5,040 for a complete system including drilling, casing, pump, and pressure tank. Drilling rates in the area range from $24 to $54 per foot, which is 33% below the national average of $7,500.

The primary aquifer serving the Ashland area is the Berea Sandstone / Glacial Drift Aquifer. Well depths can vary significantly depending on your specific property location and proximity to the aquifer.

Permits & Regulations

Ashland County health district well permit; Ohio EPA; $100-$150

See our full Ohio well drilling cost guide for permit requirements and water quality details

Get Free Well Drilling Quotes in Ashland

Compare prices from licensed OH well drillers near you.

Get Free Quotes

Well Drillers in Ashland, OH

Top-rated well drilling contractors serving Ashland, sorted by customer ratings and verified credentials.

Aqua Ace Drilling, LLC

Ashland, Ohio

License Verified

Get Quote View Profile Call

Browse all Ohio well drillers → Get Free Quotes →

Ashland Well Drilling FAQ

How much does it cost to drill a well in Ashland, OH?

The average cost to drill a residential water well in Ashland is $5,040, based on a typical depth of 140 feet. Drilling rates in the Ashland area range from $24 to $54 per foot. Total project cost includes drilling, casing, pump installation, pressure tank, electrical hookup, and water testing.

How deep are wells in Ashland?

The average residential well depth in Ashland is 140 feet. Actual depth depends on your specific property location, elevation, and proximity to the Berea Sandstone / Glacial Drift Aquifer. A local well driller can estimate the depth needed for your property based on nearby well logs and geological data.

Do I need a permit to drill a well near Ashland?

Ashland County health district well permit; Ohio EPA; $100-$150 For detailed Ohio permit requirements, licensing rules, and water rights information, see our full Ohio well drilling cost guide.

How long does it take to drill a well in Ashland?

Most residential wells in the Ashland area take 1–3 days to drill, depending on depth and local geology. The complete project — including pump installation, electrical hookup, water testing, and permitting — typically takes 1–2 weeks from start to finish. Scheduling availability with local drillers may add additional lead time.