Local 2026 Pricing · Altoona, PA

Altoona, PA Well
Drilling Cost

Avg. Depth

240 ft

Cost / Foot

$26–$64

Total Project

$10,560

vs. National Avg

41% above avg.

the $7,500 national avg.

Get Free Quotes in Altoona

Altoona, PA Well Drilling Cost by Depth

Well Depth	Drilling Only	Complete System	Est. Total
100 ft	$2,600–$6,400	$7,400–$11,200	$9,200
150 ft	$3,900–$9,600	$9,100–$14,800	$11,800
200 ft	$5,200–$12,800	$10,800–$18,400	$14,400
300 ft	$7,800–$19,200	$14,200–$25,600	$19,600
400 ft	$10,400–$25,600	$17,600–$32,800	$24,800
500 ft	$13,000–$32,000	$21,000–$40,000	$30,000

*Costs are estimates based on Altoona area rates for 2026. Complete system includes casing, pump, pressure tank, electrical, and permits. Actual prices vary by property.

Well Drilling in Altoona, PA

Blair County Appalachian Ridge and Valley with Devonian sandstone and shale (Catskill Formation); Bald Eagle Valley limestone to the north

The average residential well in Altoona is 240 feet deep and costs approximately $10,560 for a complete system including drilling, casing, pump, and pressure tank. Drilling rates in the area range from $26 to $64 per foot, which is 41% above the national average of $7,500.

The primary aquifer serving the Altoona area is the Ridge and Valley / Catskill-Pocono Aquifer. Well depths can vary significantly depending on your specific property location and proximity to the aquifer.

Permits & Regulations

Blair County well permit; PA DEP; $50-$100; mountain wells can be deep and low-yielding

See our full Pennsylvania well drilling cost guide for permit requirements and water quality details

Get Free Well Drilling Quotes in Altoona

Compare prices from licensed PA well drillers near you.

Get Free Quotes

Well Drillers in Altoona, PA

Top-rated well drilling contractors serving Altoona, sorted by customer ratings and verified credentials.

Mountain Research LLC

Altoona, Pennsylvania

License Verified

Well Drilling

Get Quote View Profile Call

Browse all Pennsylvania well drillers → Get Free Quotes →

Altoona Well Drilling FAQ

How much does it cost to drill a well in Altoona, PA?

The average cost to drill a residential water well in Altoona is $10,560, based on a typical depth of 240 feet. Drilling rates in the Altoona area range from $26 to $64 per foot. Total project cost includes drilling, casing, pump installation, pressure tank, electrical hookup, and water testing.

How deep are wells in Altoona?

The average residential well depth in Altoona is 240 feet. Actual depth depends on your specific property location, elevation, and proximity to the Ridge and Valley / Catskill-Pocono Aquifer. A local well driller can estimate the depth needed for your property based on nearby well logs and geological data.

Do I need a permit to drill a well near Altoona?

Blair County well permit; PA DEP; $50-$100; mountain wells can be deep and low-yielding For detailed Pennsylvania permit requirements, licensing rules, and water rights information, see our full Pennsylvania well drilling cost guide.

How long does it take to drill a well in Altoona?

Most residential wells in the Altoona area take 1–3 days to drill, depending on depth and local geology. The complete project — including pump installation, electrical hookup, water testing, and permitting — typically takes 1–2 weeks from start to finish. Scheduling availability with local drillers may add additional lead time.